Download Manual

Sound Clip

Notes:
-We do not recommend using this pedal in front of high gain amps or pedals, especially in Natural Decay mode.
-Although this pedal will run off a 9 Volt battery it draws a lot more current than your typical overdrive.  We recommend using a power supply.

Features:
The Echo Box is hand made in Newberg Oregon with high quality components.
Die cast metal enclosures for durability.
3PDT switches for true bypass switching.
Can be powered by a 9 Volt battery or DC adaptor
Blue LED indicator.

Can be powered by a 9 volt battery or 9VDC adaptor with a negative center 2.1mm barrel style plug.  Current draw is less than 100mA.

Start out with a great delay sound, add  intuitive and useful features, and you have your self The Echo Box.

The sound is somewhere between a digital and analog delay, but without the coldness of the the typical digital delay, or sometimes "icky" artifacts heard with analog delays. 

The repeats degrade each time they are recycled, but without any clicking, or popping often caused by "noise reduction" compandor circuits in older delays.  Instead the Echo Box uses a discrete noise reduction circuit designed from the ground up. 

Natural decay mode allows the echo effect to naturally trail off after being bypassed.  (with this feature off the pedal is true bypass)

The modulation can be turned completely off, add just a little tape like warble, or push your tone to near insanity.

Delay time is around 800ms.  Infinite repeats are possible, and the scaling of the repeat knob can be altered via an internal trimpot.